
CASE STUDY
RAIL BRIDGE DECK UPGRADE
Stringer corrosion repair and steel plate reinforcement
Industry: Rail Transport
Application: Bridge Stringer Corrosion Repair
Products: Belzona 1212, Belzona 1121 (Super XL-Metal)
Customer Location: : NSW, Australia
Application Date: Sep 2021
PROBLEM
Corrosion affected a rail bridge deck and its steel stringers, compromising the bridge’s structural integrity.
The deteriorating transoms also required ongoing maintenance and replacement, prompting an upgrade designed to strengthen the deck and provide greater long-term durability.

Precast concrete bridge deck section

A bridge deck section being manoeuvred into position
APPLICATION
In order to address these issues, a precast concrete bridge deck was designed to reduce the time and cost of ongoing maintenance, strengthen the existing deck and provide long-term durability.
Using repair plates, Belzona 1212, a rapid-cure repair composite, was selected to repair and restore the top flanges of smaller steel stringers where time was limited.
For the larger stringer sections, the team used Belzona 1121, which offered a longer working life and remained workable while the repair plates were positioned.
On a nine-metre section of stringer, applicators first pressed Belzona 1121 into the heavily corroded areas. They then spread it across the top flange with trowels, leaving a thin layer before placing the galvanised steel repair plate onto the Belzona coated stringer.
The team then drilled the plate and secured it with Huck bolts. As the bolts were installed, excess Belzona squeezed out from between the plate and the stringer, showing that the material had filled the interface, minimising trapped air and preventing moisture ingress.

Corrosion on the steel stringer before repair

Belzona 1212 applied to the prepared stringer flange

Huck bolts being installed through the repair plates

Repair plates positioned over the stringer

Nine-metre section of stringer

Belzona 1121 pressed into heavily corroded areas

Corroded areas filled with Belzona 1121

Belzona 1121 spread in a thin layer across the flange

Galvanised steel repair plate prepared for installation

Huck bolts fitted through pre-drilled holes in the repair plate
OUTCOME
The repairs restored the corroded areas of the stringers and sealed the interface between the existing steel plates and the new top plates, creating an anti-corrosive shim that helps keep moisture out, protects against further corrosion and extends the service life of the upgraded bridge deck.

Belzona 1121 squeezed out during bolting, minimising trapped air and preventing moisture ingress
More Information?
For more information about the Rezitech products and services, fill out the form below and one of our staff members will be in touch in 1-2 days.
Products
Belzona’s wide range of epoxy-based metal repair composites and high temperature coatings and linings has been used in the water and wastewater industry since the late 1970s.
Belzona 1212
A 2-part surface-tolerant epoxy composite engineered specifically for in-situ application to wet, oil contaminated and underwater surfaces. This multi-purpose solvent-free material exhibits rapid cure and excellent adhesion to manually prepared substrates, where grit blasting cannot be achieved.
Belzona 1121 (Super XL-Metal)
A 2-part repair composite for metal repair and resurfacing based on solvent-free epoxy resin reinforced with silicon steel alloy. This repair material has been developed to offer an extended working life, ideal for large applications where greater volumes of material are required or to provide adequate working time at higher temperatures.
Frequently asked questions
Corrosion had deteriorated the steel stringers and affected the integrity of the bridge deck. The deteriorating transoms also required ongoing maintenance and replacement.
Applicators pressed Belzona repair material into heavily corroded areas, then spread a thin layer across the stringer’s top flange. They positioned galvanised steel repair plates over the treated areas, drilled the plates and secured them with Huck bolts.
The team used Belzona 1212 on smaller stringers where time was limited, as it is a rapid-cure repair composite. For larger sections, they used Belzona 1121 (Super XL-Metal), which provided a longer working life while the repair plates were positioned.
Belzona filled the corroded areas and sealed the interface between the stringers and repair plates. As the Huck bolts were installed, excess material squeezed out, showing that the interface had been filled and helping minimise trapped air and prevent moisture ingress.
The precast concrete deck was designed to strengthen the existing bridge deck, reduce the time and cost associated with ongoing maintenance, and provide greater long-term durability.
About Rezitech
Established in 1968, Rezitech is the sole Australian Distributor for Belzona. Rezitech offers a comprehensive range of industrial protective coatings and epoxy metal repair composites to many different industries including: oil and gas, mining, power, water and waste water, pulp and paper, marine, manufacturing among others.
We value growth and innovation within the maintenance solutions industry
Our Mission
To provide industry with easier maintenance solutions that provide cost effective, efficient and long lasting results for our valued clients. To provide an integrated industry service by striving for Rezitech being a truly complete solutions provider!
Our Values
We value the needs of our clients and place a huge emphasis on providing specialist skills and knowledge.
From engineering to fitting, blasting or coating to sales, administration and customer service, we highly value our organisation and encourage diversity andgrowth to benefit our client and our team of people.
Our Vision
To strive for excellence in our delivery of high quality industrial maintenance solutions. To be our clients’ preferred choice when it comes to solving all of their maintenance and new pump needs while helping to reduce their carbon imprint.
Health and Safety
Rezitech is committed to ensuring the health, safety and welfare of its employees, contractors, visitors and customers who may be affected by Rezitech’s operations. We strive to pursue standards of safety that meet and exceed statutory duties.
Community & Environment
While providing solutions for our clients Rezitech focuses on identifying ways to improve business environmental performance while increasing productivity and reducing costs of production for the benefit our clients and hence the community.
The Future
To continue to strive for excellence! To continue to lead the way in industrial maintenance solutions and services and provide our clientele with high quality, complete and reliable products and services.
Rezitech’s mission is to make its liquid ring vacuum pump expertise available to sugar mills, paper mills and process industries worldwide. We currently export to:
- Fiji
- Thailand
- Mauritius
- Indonesia
- United Kingdom
- Phillipines
- Malaysia
- New Zealand
- Papua New Guinea
We are constantly on the look out for new export opportunities and new countries to export to Rezitech places an emphasis on the development of export business worldwide.
For further information on a Flowtech Distributorship please contact us.














